High-lifter Max Clearance Front Lower Control Arms for Polaris Manual de usuario descargar pdf (Pagina 3)

Installation Instructions:

1. Place jack under center of Ranger front end and lift until front wheels clear the

ground. Be careful to support the UTV properly so that it is securely supported

but so that A-arms and shocks can droop to full extension.

2. Remove front wheels.

3. Remove lower A-arm from the UTV.

4. Remove the bushings, sleeves, and ball joints from the stock control arms. You

will need to reuse these in the new forward a-arm kit.

5. Install the grease fittings supplied in the kit into the new arms. DO NOT OVER

TORQUE FITTINGS!

1 2 3 4 5

Sin comentarios

High-lifter Max Clearance Front Lower Control Arms for Polaris Manual de usuario Pagina 3