High-lifter Radiator Relocation Kit - Polaris 800 (05-14) Manual de usuario descargar pdf

780 Professional Drive N. Shreveport, LA 71105 Phone (318)-524-2270 Fax (318)-524-2297

Polaris Sportsman Radiator Relocation Kit

WARNING:

Be advised that there are certain hazards of burning or scalding, that are

created by installing radiators with potentially boiling hot fluids in

locations other than those selected by the ATV manufacturer. By

relocating the radiator, the customer and installer indicate that they

understand and accept all risks and liability that are or may be created by

moving the vehicles radiator to a non standard location. The purchaser

and installer hereby release High Lifter and it officers and employees

from any and all potential responsibility that may arise from installation

of this radiator relocation kit. It is also the duty of the installer or

purchaser to inform the rider or next owners of these potential hazards.

Upon completion verify all hoses and wires are not touching or rubbing

the plastic. Vibration WILL

rub a hole in the lines very quickly. Zip-

tie all lines and hoses securely.

1 2 3 4 5 6 7 8 9

Pagina 1

780 Professional Drive N. Shreveport, LA 71105 Phone (318)-524-2270 Fax (318)-524-2297 Polaris Sportsman Radiator Relocation Kit WARNING: Be advise

Parts Diagram

Installation Instructions 1. Remove front plastic from ATV. 2. Drain the stock radiator and dispose of used fluid according to your local regulat

6. Preassemble the new radiator relocating kit. Assemble the frame using the ¼ x ¾ carriage bolts (4ea), ¼ lock nuts (4ea), and ¼ flat washers (4ea)

9. Now attach the overflow bottle to the right leg of the rack mount kit. You will need to use the two small spacers, 6 x 35mm bolts, 6mm lock nuts

12. Once the kit is assembled, place the kit on the front rack and mark the holes that need to be drilled to allow the hoses and wires for the fan

15. When the holes are drilled and cut, attach the radiator kit to the top of the rack/lid using ¼ x 2 ¼ bolts, ¼” lock nuts, ¼” washers and the flat

18. Once you connect the hoses to the inlet and outlet ports on the radiator, connect the filler neck water line to the inlet. 19. Use the T-fitting

22. VERY IMPORTANT: Place the protective sleeve around the hoses to keep them from rubbing on the rack. If the hose is left unprotected the vibratio

Sin comentarios

High-lifter Radiator Relocation Kit - Polaris 800 (05-14) Manual de usuario